how we create bootble usb

Rufus

Create bootable USB drives the easy way

Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc.
It can be especially useful for cases where:

• you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.)
• you need to work on a system that doesn't have an OS installed
• you need to flash a BIOS or other firmware from DOS
• you want to run a low-level utility

Despite its small size, Rufus provides everything you need!
Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USB from ISOs ⁽¹⁾.
A non exhaustive list of Rufus supported ISOs is also provided at the bottom of this page ⁽²⁾.

 >> Download <<

• Rufus v1.3.4 (459 KB)

BY HaRis

How to install windows 7 to usb

1. • The Flash Drive should have a decent read/write speed
     
     
     
   • The size of the drive should be at least 4GB
     
     
     
2. 2
   To prepare the USB Flash Drive, we need access to a computer running either Windows Vista™ or Windows 7™. Insert the Flash Drive in the computer and wait for the computer to recognize the drive.
   
   
   
3. 3
   Click START > All Programs > Accessories
   
   
   
4. 4
   Right click on Command Prompt and select “Run As Administrator”
   
   
   
5. 5
   In Command Prompt, type DISKPART
   
   
   
6. 6
   Type SELECT DISK 1 [ The Picture Shows 2 Because Of My Drive Allocations ]
   
   
   
7. 7
   Type CLEAN [ A successful clean will prompt the message “Diskpart succeeded in cleaning the disk” ]
   
   
   
8. 8
   Type CREATE PARTITION PRIMARY
   
   
   
9. 9
   Type SELECT PARTITION 1
   
   
   
10. 10
    Type ACTIVE
    
    
    
    • By following the above step we have just created a USB Flash Drive capable of booting from the system BIOS.
      
      
      

Copying The Installation Files

1. 1
   The next step is to copy the files from the Original Windows Vista™ / Windows 7™ disc. Before we copy the content of the disc to the Flash Drive, we have to make sure that the drive is ready to accept files. In the same Command Prompt that we have used in the previous step, type the following commands
   • Type FORMAT FS=NTFS QUICK [ When it reaches 100% you are ready to move to the next step ]
     
     
     
   • Type ASSIGN
     
     
     
   • Type EXIT to get out of DISKPART Command Utility
     
     
     
2. 2
   Now your Flash Drive is ready for the files. Insert your Windows disc into your drive. In my case, my Disc Drive is I: drive and my FLASH Drive is J:
   
   
   
3. 3
   Type XCOPY I:\*.* /S/E/F J:\ [ This Command needs to be typed in the same Command Prompt that we have left open after Diskpart.
   
   
   
   • If your Drive letters are correct, after several minutes you will get a message saying the numbers of files successfully copied to your FLASH DRIVE
     
     
     

BY HaRis

Facebook New Latest Tricks

Facebook New Latest Tricks 2012

Facebook New Latest Tricks 2012

As we all know Facebook is now-a-days a big and Amazing traffic Network Social Networking Website.Its daily hits/visitors and readers is in millions and billions,according to the new surve 2012 facebook commenters (daily commenters) are approximatly in millions or + , however its a nice Socail Networking website to make friends and make a friendly colony there. Moreover every one is Providing tips and tricks about facebook But what i have found is bugs :P or Tricks ,  i don,t know that but it is interested and i wanna share with my friends so try and enjoy this ;) Hope you will Like , Must share it with your Friends ! .

Tricks/Bugs are Well explained below :-

1) First update a status and the Comment this @[0:1] after commenting this you will get the result in comments 1 xD its mean @[0:1] = 1 xD . Don,t Know why facebook can,t handly this .

2) This one is also interested . How to do this xD ? First Update a status then comment this @[234:234]  by Pressing enter it will give the result in the form of Name which is "Chrystyna Jnq" now instead of 234 you can type any numeric value and after commenting it will give you a "Name" in result xD . Try it and share with your friends ;).

1st Step

After xD !

3)Another tricks/Bug is whenever you type this @[01:01] so facebook will give this error xD "Unable to comment" Try again " . This one is also cool xD .

4) Empty Status:- How to Update empty Status on Facebook? or How to Post Empty Status On Facebook? Its easy Just Go to Facebook.com Sign in and Now Time to update empty Status || oK
Press Alt and type 0173 (from Numeric Pad). And Enjoy Empty Status Updation ;)

BY HaRis